2pcs EMI Filters board
Share to:
Item#: MABP0208
$3.33 (unit price)
Quantity:
$3.33 (unit price)
Quantity:
Buy more...Get lower price
| Quantity | Unit price (USD) |
| >= | $ 3.33 |
| >= | $ 2.78 |
| >= | $ 2.38 |
Features and Specifications
2pcs EMI Filters board
Finished and tested board
PCB size:W21xL49xH19mm
Price is for 2pcs
☆ EMI filter should consider its operating voltage, current, voltage values.
Finished and tested board
PCB size:W21xL49xH19mm
Price is for 2pcs
☆ EMI filter should consider its operating voltage, current, voltage values.
☆ EMI filter should be installed in the power position of the entrance, in order to reduce radiated interference.
☆ The twisted 2 cable is better, which can eliminate some high-frequency interference signals.
☆ EMI filter input and output lines should not parallel, you need a certain distance to ensure the filter functions.
☆ EMI filter points E and the chassis must be good contact, and connect the ground wire.
● Remarks
L is AC220V Live wire ,
N is AC220V Neutral wire.
E is a pubic output ( GND) connected to the chassis.
Component list:
Yellow one is 0.01uF / 275VAC 2 pcs
Blue one is 0.001uF / 400VAC 2 pcs
Inductor is 700uH
More images of MABP0208
MABP0208-01
MABP0208-02
MABP0208-03
MABP0208-04
MABP0208-05
